Wolfking® C400 MaxiGrind

Wolfking® C400-Uni-S Frozen Block Grinder (Used)

Contact Larry for Price (614) 716-9820

This machine is in very good condition and is complete with all tooling and Master Control Panel.  See the attached photos below.   The Wolfking C400 Frozen Block Grinder is used through-out the World and the USA.  It is a work horse grinder and I have customers that have been running this machine for over 30 years.  The Spare parts are readily available here in the USA from NPKLLC.  I also presently stock a large inventory of parts for this machine in Columbus, Ohio.  I also provide both in-plant and technical support for all Wolfking machines.

• Rated at 16,000 pounds/hr with a ½” holeplate.

• Will handle mixed fresh and frozen meat down to 10 deg F with an S-Configuration.

• Includes the following:  Stainless Steel S Auger, lining, knife housing, knife set, (to be determined), Screw Cap, Spacer, Assembly tools, Push Button/E-Stop controls, 125HP motor, 125 HP gearbox, belt and pulleys.

• Availability 1-2 weeks ARO

• SS Enclosure with dis-connect, (forward/reverse Starters), 480V/60/3ph

Specifications for Wolfking® C400 Uni-S

Size: See Dimension Sketch

Plate Size: 400mm (15 ¾”)

Motor: 125 HP, 1200 RPM, 3 x 440 volts, 60 c/s, totally enclosed

Starter: Automatic, reversible Star/Delta in NEMA 4 enclosure

Design: 1. Stainless Steel 18/8

2. Assembled with clamp system with davit and tackle for easy assembly and disassembly by one person

Capacity: 1. Up to 16,000 pounds per hour through ½” holeplate

2. Handles frozen blocks down to 10 F as well as fresh

Block Size: 8” x 16” x 32”

Knife Set: 1. Fixed precutter

2. Eight-bladed cut knife with positive cutting angle, cuts on both sides

3. Holeplates available from 1/8” to 2” with tapered/conical holes

Service: 1. Easy to service and clean

2. Included in preventive maintenance program

3. Parts stocked in Columbus Ohio

4. Knife/plate sharpening available